SIP SILVERCUT DISC 340 F FC Betriebsanleitung Seite 162

SILVERCUT
3
3
2
2
1
Attach the chains with shackles to the bolt of the PH2
quick hitch. Attach them to the tractor so that the
angle of the chains is as vertical as possible. Set the
3
length so that the chains stop the tractor hydraulic
three-point leverage in the working height of the
mower, when the leverage is lowered in the floating
position.
To lift or lower the cutter bar with the mower
hydraulics, the selection valve on the connection must
be in "LIFT" position.
2
1
33