SIP SILVERCUT DISC 340 F FC Betriebsanleitung Seite 151

Instruction for work
5
2
1
3
2
Performing the hitching
– Move the tractor closer to the mower and connect
the quick hitch by lifting the tractor's hydraulics.
– Following the initial connection, adjust the block to
allow maximum ventilation of 2 mm (see figure).
– Secure the quick hitch with safety device (4) to
prevent the fall out of the machine.
– Fasten the elastic bands on each side into the hole
(1). For versions without the conditioner also (5).
4
Settle the protective curtain on joints to
secure the covering of the nex two
protective curtains.
2.2.1 Longitudinal adjustment of the hitch and
grass cutting height
In the direction of movement of the tractor, the hitch
must always be inclined at an angle of 2º.
22
2 mm