Hydraulic Hitch Up - SIP SILVERCUT DISC 340 F FC Betriebsanleitung

2
1
– Place the tractor on even ground.
– Check if the cutter bar in transport position is
placed parallel with the ground in the transverse
drive direction.
– Remedy any deviations by stretching the first
spring (1) and releasing the second spring (2) or
vice versa.
1
2

2.4 Hydraulic hitch up

For the mower the tractor needs:
– The hydraulic hitch for the hydraulic relief of the
cutter bar (1).
1
–
Prior to the connection of the hydraulic
hitch to the tractor's hydraulics, ensure
that the medium in the hydraulic
system of the machine, as well as the
tractor, is not under pressure.
– Connect the hydraulic pipe to the tractor's one-way
circulation system.
–
Pay attention to clean and dry clamp.
Dirt may cause untightness and damage.
–
The minimum required operating
pressure of the tractor is 100 bar and
the maximum permitted is 200 bar.
25
SILVERCUT