Technical Data - ECOLAB CDI01 Bedienungsanleitung

11

Technical data

Power supply:
depending on the version
Max. current consumption:
Power supply main PCB:
Ingress of protection:
Protection class:
Metering capacity:
Suction height:
Inputs:
Output:
Control electronic:
Indication:
Control functions:
Conductivity measuring:
Measuring range:
Accuracy:
Reproducibility:
Maximum metering time:
Delay time when detergent low:
Manual metering time:
Pre-metering time:
Environment temperature:
Dimension:
Weight:
*Technical changes are reserved, due to our products subject to further developments.
417101089_CDI01.doc
(230 V, 50/60 Hz), (115 V, 50/60 Hz),
(24 V, 50/60 Hz)
65 mA
2 x 12 V AC, 15 VA 50/60 Hz
IP 65
II
approx. 15 l/h against 0,6 bar
max. 2 m
on the main PCB:
- power supply 2 x 12 VAC
- Conduktivity conductivity sensor, inductive
- temperature sensor in the washing tank
- detergent empty signal, 5 VAC
on the additional PCB (optional):
- external metering enable,
zero-potential contact
- external pre-metering enable
zero-potential contact
on the main PCB:
- detergent metering pump, 24 VAC
- audible alarm, 24 VAC (buzzer)
2-line, 16igit liquid crystal display LCD
- conductivity control
- time control
- 0 -200 mS/cm
- in steps of 0.1 mS/cm
(0.1 - 19.9 mS/cm)
- in steps of 1 mS/cm
(20 - 200 mS/cm)
- automatic range-changing
± 2% of conductivity measuring value for
conductivities ≥ 10 mS/cm
± 1% of conductivity measuring value for
conductivities ≥ 10 mS/cm
10 - 9999 Sec.
1 - 9999 Sec.
1 - 9999 Sec.
0 - 9999 Sec.
max. 45°C
360x 110 x 160 mm (B x T x H)
approx. 4,8 kg
- 57 - Rev.: 4-01/10