MAINTENANCE
The battery charger does not need any maintenance. To ensure optimum performance from the equipment,
once a year check the cables and the electrical connections.
TECHNICAL DATA
MODELLO
OUTPUT CHARACTERISTICS
Maximum output current
(1)
Charge absorption voltage
Charge float voltage
Residual ripple
(2)
Charging characteristics
Number of outputs
(3)
INPUT CHARACTERISTICS
Supply voltage
Frequency
Maximum absorption (230/240 Vac)
Maximum absorption (115 Vac)
ϕ
Power factor (cos
)
PROTECTION
Reverse polarity
(6)
Overload
Output short circuit
Overvoltage in output
(7)
Overheating
Battery overtemperature
AMBIENT CHARACTERISTICS
Operating temperature
Cooling
Humidity
CASE
Material
Colour
Dimensions (WxHxD)
Weight
GENERAL
CAN bus interface
Safety classification
EMC class
(1)
Maximum value at normal use or in short circuit.
(2)
At maximum output current on resistive load.
(3)
Each output can supply the maximum value of nominal current. The sum of the currents supplied from each output can not exceed
the maximum nominal value of the equipment.
(4)
With supply voltage as equal 230Vac and output current equal to the maximum nominal value.
(5)
With supply voltage as specified and output current equal to the maximum nominal value.
(6)
Protection may be inefficient in some operative conditions.
(7)
Software/hardware double-check.
Cycoloy
®
is a registered trade mark of GE Plastics.
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
SBC ADVANCED PLUS HI-POWER - REV004A
MAINTENANCE - TECHNICAL DATA
SBC 1100 ADV PLUS FR
80 A
14,1 Vdc (14,4 Vdc GEL)
13,5 Vdc (13,8 Vdc GEL)
280÷83 Vac, with power
reduction under 97 Vac
(4)
6,4 A
(5)
12,9 A
SCB 1450 ADV PLUS
60 A
90mV RMS max
Automatic in three stages IU o U
3
280÷150 Vac, with power reduction under 195 Vac
45÷66 Hz
8,9 A
1
Yes, through fuse
Yes
Yes
Yes
Yes
Yes, optional
-20 ÷ +70 °C, with power reduction over +50 °C
Forced, by variable speed cooling fan
Max. 95% RV without condensation
Stainless steel - Cycoloy
Polished steel - OR5066
272 x 495 x 127
7,1 kg
Yes
EN 60335-2-29
EN 55022/A
SBC 1950 ADV PLUS
80 A
28,2 Vdc (28,8 Vdc GEL)
27,0 Vdc (27,6 Vdc GEL)
11,9 A
-
®
GB
23