Description Of The Model - Reely ROAD Ice Land ARR Bedienungsanleitung

3 D
ESCRIPTION OF THE MODEL
D
O YOU WANT EVERYTHING AND IMMEDIATELY
You made the correct choice with Monster Truck Ice Land RtR. The engine with starter cord, air filter, manifold
and resonance tube is already mounted, as well as the complete RC system with servos and receiver with ON/OFF
switch. For the rechargeable batteries of the receiver, there is a practical box screwed onto the chassis.
A finished car body and a matching decal sheet are included in the delivery; the car body support is also mounted.
However, you still have to charge rechargeable batteries or to insert batteries, to fasten the spark plug, to fill the tank and
to install the car body. Now, you are ready!
In the ARR (Almost Ready to Run) version, the RC installation is not part of the delivery. Receiver, steering servo and gas/
brake servo still have to be installed.
Highest quality materials and first-grade workmanship guarantee untroubled driving fun even under tough operating conditi-
ons and a long life of the model.
The low degree of maintenance leaves you lots of time to concentrate on driving and to perfect your manner of driving.
T I
ECHNICAL NFORMATION
E
NGINE
Monster Truck Ice Land is driven by an air-cooled 4.58 ccm two stroke engine with 2.15 kW (2.9 PS).
Slide carburettor, manifold and resonance tube are already mounted. The slide carburettor of a new type made of aluminum
and plastic is easily adjustable, hence allowing for a perfect engine calibration.
The recoil starter cord that is flanged onto the crank case makes it possible to start the engine without other tools.
The engine is operated with environmentally-friendly model fuel based on oil/methanol, the tank with snap closing holds
125 ccm.
D
RIVE
The driving power of the 3 PS two stroke engine is transmitted to the enclosed center differential and from there to the
differential in the front and rear axle.
All differentials have metal bevel wheels and planet wheels, the axle drive shafts are supported by ball bearings.
C
HASSIS FRAME
The independent wheel suspension at the double transverse control arms as well as the aluminum oil dampened shock
absorbers which are adjustable with spacer rings optimize road-holding, thus fulfilling all expectations.
Two independent adjustable disk brakes with steel brake discs offer a braking power at the front and rear axle that can be
adapted to driving style and terrain.
The adjustable servo saver protects the steering servo in hard terrains.
The transverse stabilizer at the rear axle reduces the inclination of the model to understeer, which makes driving behavior
more agile.
C
HASSIS
The ground support plate made of Duralumin and the reinforcing cross-ties of front axle to the center differential and of rear
axle differential to the chassis guarantee a high stability with small weight.
The lateral chassis lining strips protect the components against falling stones.
A hoisted and doubly reinforced collision protection at the front prevents the model from getting damaged through small
collisions.
T
UNING
Clamping screws in the upper transverse control arms are used to adjust the camber inclination of the front and rear axles,
the alignment is effected by resetting the steering links in other linkage points.
With the tunable aluminum oil dampened suspensions you simply "straighten out" ground unevenness.
34
?
Operating Manual 4WD GP Monster Truck Chassis Item No. 23 43 60 / 61