Getting Started With The Model Vehicle; A) Connecting Drive Battery - Reely ROAD MISSION Bedienungsanleitung


9. Getting Started
 with the Model Vehicle

a) Connecting drive battery

Before connecting the drive battery with the cruise control, start using the remote control transmitter and check the
function of the transmitter in accordance with the instructions for use.
To prevent a sudden starting of the wheels and therefore an
uncontrolled starting of the model, place the model vehicle
on a suitable wooden block (1) or similar, so that the wheels
can turn freely in case there is a fault scenario.
Now connect the drive battery with the cruise control with
the help of the plug (2) that is protected against polarity re-
versal.
Should the electric motor not stop, when the control lever for the driving function is in the idling mode, then the drive
regulation must be programmed.
Please pay attention to the operating instructions included for the drive regulation. In these, you will find
a complete description of how the programming is to be done, or, respectively, which programming
functions are available.
Figure 4
31