F) Displaying The Cumulated Max/Min Values For The Weather Data - Eurochron 2203063 Bedienungsanleitung

Reading the wind direction
3
Read the current wind direction using the direction indicator triangle. It shows the wind direction along with the direc-
tion bars around the compass circle. The wind direction over the past 5 minutes is indicated by the direction bars. See
Section 'c) Display symbols', 'Display area for wind values (direction/strength) (1.4)'.

f) Displaying the cumulated MAX/MIN values for the weather data

You can call up various maximum and minimum weather data values from the memory and display them on the LC
display (10).
In normal mode, press the MAX/MIN button (5) to display the MAX/MIN data sets. Each press moves one step
forward in the sequence. The displays are in the following order:
Indoors (or current channel) MAX. Temperature → Indoors (or current channel) MIN. Temperature → Indoors (or
current channel) MAX. Air humidity→ Indoors (or current channel) MIN. Air humidity → Outdoors MAX. Temperature
→ Outdoors MIN. Temperature → Outdoors MAX. Air humidity → MIN. Outdoor air humidity → MAX. Average wind
speed → MAX. Gusts → MAX. Relative pressure → MIN. Relative pressure → MAX. Absolute pressure → MIN.
Absolute pressure → MAX. Feels like → MIN Feels like → MIN. Heat index →MAX. Heat index → MIN. Wind chill
→ MAX. Wind chill → MAX. Dew point → MIN. Dew point → MAX. Daily precipitation.
Deleting MIN/MAX values
1
• Press and hold the MAX/MIN button (5) for 2 seconds to reset the MAX/MIN records for the current weather
display area.
The LC display shows the '
• The outdoor sensor must be contacted again if new values are to be displayed.
Weather records for the past 24 hours
2
The weather station automatically saves the weather data from the past 24 hours.
1. Press the HISTORY button (4) to display the weather data for the current hour, e.g. the current time is 8 March,
7:25 a.m. The display shows the data for '8 March, 7:00 a.m.'.
2. Press the HISTORY button (4) repeatedly to display older measured values for the past 24 hours, e.g. 6:00 a.m. (8
March), 5:00 a.m. (8 March), ..., 10:00 a.m. (7 March), 9:00 a.m. (7 March), 8:00 a.m. (7 March), etc.
3. The LC display (10) shows the '
' symbol together with the time and date of the data sets.
' symbol together with the time and date of the data sets.
67