C) Automatic Channel Change; D) Display Of The Minimum/Maximum Values; E) Erasing The Minimum/Maximum Values - Eurochron EFWS 310i Bedienungsanleitung

Briefly press the CHANNEL button (8) to select the desired outdoor sensor for temperature
display. The respective channel number is displayed to the left of the outdoor temperature (17).

c) Automatic channel change

When using more than one outdoor sensor, the weather station can automatically switch
between channels. The measured values of each channel are displayed for approx. 5 seconds
each.
This function is only available when more than one outdoor sensor is registered to the
weather station.
• To enable this feature, press and hold the CHANNEL button (8) until the
(next to the channel number).
• If you want to turn the function off again, press and hold the CHANNEL button until the
icon disappears.

d) Display of the minimum/maximum values

• Briefly press the ▲ or ▼ buttons (3 or 5) repeatedly until the
• If you are using more than one sensor, select the corresponding channel (1, 2 or 3) using the
CHANNEL button (8).
• Briefly press the MEM button (4) to display the minimum values for the indoor/outdoor
temperature; "MIN" also appears.
• Briefly push the MEM button again to display the maximum values for the indoor/outdoor
temperature; "MAX" also appears.
• Press the MEM button again to return to the display for the current measured values.

e) Erasing the minimum/maximum values

• Briefly press the ▲ or ▼ buttons (3 or 5) repeatedly until the
• Press and hold down the MEM button (4) for approx. 3 seconds. The minimum and maximum
values are then erased.
The current measured values are saved as the new minimum and maximum values
until there is a change.
54
icon appears
icon flashes.
icon flashes.