Disposal And Recycling - Scheppach PL55Li Originalbetriebsanleitung

All maintenance and repair work that requires an
•
opening of the motor housing must be performed
by an authorised customer service workshop.
Cleaning
Keep the device as free of dust and dirt as possi-
•
ble. Rub the device clean with a clean cloth or blow
it off with compressed air at low pressure.
We recommend that you clean the device directly
•
after every use.
• Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents; they could attack the plastic
parts of the device. Make sure that no water can
penetrate the device interior.
Observe the following information:
Always keep the cooling air openings in the hous-
•
ing clean and clear for air circulation.
Vacuum all openings to remove wooden splinters
•
and chips from the electrical tool.
Keep the connection contacts on the electrical
•
tool, charging unit and rechargeable battery pack
clean.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the follow-
ing parts are therefore also required for use as con-
sumables.
Wear parts*: Carbon brushes, saw blade, batteries,
rechargeable batteries
* Not necessarily included in the scope of delivery!
Information on the rechargeable battery packs
• Store in a dry, cool place at a temperature of 5 °C
to 25 °C.
Protect rechargeable battery packs from moisture,
•
water and heat.
Do not leave empty rechargeable battery packs
•
plugged into the charging unit for more than ap-
prox. one month, if the charging unit is discon-
nected from the mains. Danger of deep discharge!
If Li­ion battery packs are stored without use for an
•
extended period of time, they should be charged
to 40% capacity.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and elec-
tronic equipment (WEEE). This product must be dis-
posed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing
to the effective use of natural resources. You can
obtain information on collection points for waste
equipment from your municipal administration, pub-
lic waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
23 І GB