Storage; Maintenance; Disposal And Recycling - Scheppach SBS1100 Original Bedienungsanleitung

• Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents; they could attack the plastic
parts of the device. Make sure that no water can
penetrate the device interior. Water entering a power
tool will increase the risk of electric shock.

13. Storage

Store the device and its accessories in a dark, dry and
frost-free place that is inaccessible to children. The op-
timum storage temperature lies between 5 and 30 ˚C.
Store the power tool in its original packaging. Cover the
power tool to protect it from dust or moisture. Store the
operating manual with the power tool.

14. Maintenance

m Attention!
Disconnect the mains plug before carrying out any
maintenance work.
Changing the grinding disc (Fig. 12)
• Loosen the three screws for grinding disc cover (3a).
• Remove the grinding disc cover (3).
• Loosen the hexagonal nut (4a) with the enclosed
open-end spanner size 14/17 (18).
• Remove the outer grinding disc flange (4b) and the
grinding disc (4).
• Insert the new grinding disc (4) and fasten it in re-
verse order.
• Attention! When using the ceramic grinding
disc, the outer saw blade flange (4b) and inner
saw blade flange (4c) must be replaced by the
two washers (4d).
The device has no further internal parts that require
maintenance.
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consumables.
Wearing parts*: Abrasives
* may not be included in the scope of supply!
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
26 | GB
Please provide the following information in the event
of any queries:
• Type of current for the motor
• Data of machine type plate
• Data of motor type plate
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.

15. Disposal and recycling

Information on packaging
Information on the German Electrical and Elec-
tronic Equipment Act (ElectroG)
Electrical and electronic appliances do not
belong in household waste, but should be
collected and disposed of separately.
•
that are not installed permanently in the old appli-
ance must be removed before disposal. Their dis-
posal is regulated by the battery law.
• Owners or users of electrical and electronic appli-
ances are obliged by law to return them after use.
• The end user bears personal responsibility for de-
leting his personal data from the old appliance to be
disposed of.
• The symbol of the crossed-through rubbish bin
means that electrical and electronic appliances may
not be disposed of in the household rubbish.
• Electrical and electronic appliances can be handed
in at the following places at no charge:
- Public service disposal or collection points (e.g.
municipal building yards)
- Points of sale of electrical appliances (stationary
and online) provided traders are obliged to take
them back or offer this voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Used batteries or rechargeable batteries