Simulator/Student Transmitter Function - Reely X250 Bedienungsanleitung

13. Simulator/Student Transmitter Function

If required, you can also use the transmitter at the PC for simulations or games. In this case, you will require the
optional USB cable (Conrad item no. 517956) and suitable computer software (e.g. flight simulation games, etc.).
The USB cable is connected to the PS/2 interface socket
(1) at the rear of the transmitter.
1
At correct connection and proper installation, the acti-
vated transmitter is recognised by the operating system
(e.g. at least Windows XP or higher required) and can be
used like a commercial joystick.
For all further information on this, see the operating in-
structions of the USB cable.
Alternatively, the signal output of the remote control may
be used to control a teacher transmitter. In this case,
the remote control "HT-4" acts as the student transmitter.
Further information on this can be found in the operating
instructions of the teacher transmitter.
Figure 25
68