Reely X250 Bedienungsanleitung Seite 226

Nod trimming
If the racecopter tries to drift forward, reduce the speed
until the racecopter is standing safely on its landing
struts again. Now push the trim button for the nodding
function (also see figure 21) down or towards your body
several times.
Push the pitch stick carefully forward and check if the
adjustment was sufficient. Repeat the procedure until
the model does not show any tendency to drift forward.
If the racecopter tries to drift backwards, push the trim
button for the nodding function up or away from your
body.
Pitch trimming
The trim button for the pitch function (see figure 22)
should remain set in the middle position.
Otherwise, it is possible that the electronic system in
the racecopter does not recognise the bottom position
of the control stick for the pitch function properly; the
installed protective voltage will then prevent the motors
from starting up.
Figure 21
Figure 22
65