HBM QUANTUM X Bedienungsanleitung Seite 9

CANBus
Maintenance and cleaning
The modules are maintenance-free.
S Before cleaning, disconnect all connections.
S Clean the housing with a soft, slightly damp (not wet!)
cloth. Never use solvent, as this could damage the
label or the housing.
S When cleaning, ensure that no liquid gets into the
module or connections.
Bus connecting and Outputs
Particular attention must be paid to safety when
connecting to the CANbus and when sending CANbus
messages. Ensure that integration alone, status or
control signals cannot initiate any actions that may pose
a danger to persons or the environment.
Product liability
In the following cases, the protection provided for the
device may be adversely affected. Liability for device
functionality then passes to the operator:
S The device is not used in accordance with the operat­
ing manual.
S The device is used outside the field of application de­
scribed in this section.
S The operator makes unauthorized changes to the
device.
Warning signs and danger symbols
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
A4461-2.0 HBM: public
Safety instructions
7