Setting The System; Turn On The Tv And The System; Setting The Tv Display - Yamaha MCR-840 Bedienungsanleitung

SETTING THE SYSTEM

Turn on the TV and the system

Make sure that you have completed all the necessary
connections (see "Connecting a TV to the system" on
page 9).
1
Turn on the TV to which the DVD player is
connected.
Select the TV input to match the input connected to
the DVD player.
2
Press to turn on the receiver.
3
Press DISC.

Setting the TV display

Set the aspect ratio of the DVD player according to the TV
you have connected. The format you select must be
available on the disc. If it is not, the TV display setting
will not affect the picture during playback.
, , , ,
ENTER
SETUP
1
Press SETUP.
The DVD setup menu appears on the screen.
Audio Settings
Play Mode
Initial Setting
2
Press to select "Initial Settings",
/ / /
and then press ENTER.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
14
En
SETTING THE SYSTEM
Video Adjust
Disc Navigator
On
Dolby Digital
DTS
96kHz > 48kHz
MPEG > PCM
3
Press to select "Video Output", and then
/
press ENTER.
4
Press to select "TV Screen", and then
/
press ENTER.
Initial Settings
TV Screen
Digital Audio Out
Video Output Component Out
Language HDMI Resolution
Display HDMI Color
Options
5
Press to select one of the options below,
/
and then press ENTER.
4:3 (Letter Box)
Select this if you have a conventional TV. In this case, a
wide picture with black bar on the upper and lower
portions of the TV screen will be displayed.
4:3 (Pan&Scan)
Select this if you have a conventional TV and want both
sides of the picture to be trimmed or formatted to fit your
TV screen.
Note
If the disc does not support an aspect ratio of 4:3 (Pan&Scan), the
content is displayed in 4:3 (Letter Box).
16:9 (Wide)
Select this if you have a wide-screen TV.
16:9 (Compressed)
Select this if a wide-screen TV is connected to the DVD
controller with an HDMI cable, and set HDMI Resolution
to either "1920 x 1080p", "1920 x 1080i", or "1280 x
720p". When playing back a content whose aspect ratio is
4:3, black bars cover the sides of the screen.
4:3 (Letter Box)
Interlace
720x480p
Component