Connecting A Recorder (Cdr, Mdr, Etc.); Connecting An Av Receiver Or Decoder - Yamaha MCR-840 Bedienungsanleitung

PREPARATIONS
Connecting a recorder (CDR, MDR,
etc.)
You can connect a recording component, such as a CDR or
MDR, to the DVD player for recording.
DVD player (DVD-840)
Optical cable
(sold separately)
Recording component
Notes
• Do not connect the power cable to the DVD player until all
other connections have been completed.
• Turn off the recording component before connecting it to the
DVD player.
• The DIGITAL OUT outputs audio only when the input source is
DISC or USB, and with some discs and files, recording may not
be possible due to copy protection.
10
En
(CDR, MDR)
Connecting an AV receiver or
decoder
The DVD player downmixes multi-channel sources, such
as Dolby Digital and DTS, into a 2-channel stereo mix that
you can enjoy through the speakers connected to the DVD
player. By connecting an AV receiver/decoder to the DVD
player's DIGITAL OUT jack, you can enjoy Dolby Digital
and DTS sources though the speakers connected to your
AV receiver/decoder.
Notes
• Make sure the digital audio output settings are configured so
that the DIGITAL OUT outputs MPEG, Dolby Digital, and
DTS material as it is and not as PCM.
• You may want to turn down the volume on the DVD player all
the way when listening through the speakers connected to your
AV receiver/decoder.
• The DIGITAL OUT outputs audio only when the input source is
DISC or USB.
DVD player (DVD-840)
Optical cable
(sold separately)
AV receiver/decoder