Herunterladen Inhalt Inhalt Diese Seite drucken

Resetting The Dvd Player - Yamaha MCR-840 Bedienungsanleitung

Receiver/dvd player/ampli-tuner/lecteur dvd
Vorschau ausblenden Andere Handbücher für MCR-840:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 120
SPECIFICATIONS
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson Multimedia.
iPod™
"iPod" is a trademark of Apple Inc., registered in the U.S. and
other countries.
"Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
DivX, DivX Ultra Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS 2.0 + Digital
Out are registered trademarks and the DTS logos and Symbol are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights
Reserved.
"HDMI", the "HDMI" logo, and "High-Definition Multimedia
Interface" are trademarks or registered trademarks of HDMI
Licensing LLC.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
54
En

Resetting the DVD player

You can reset the DVD player to its factory defaults.
1
Set the DVD player to standby.
2
While holding down
front panel, press
3
Release
when "DVD — NO REQ." is
displayed on the front panel display.
4
Press
/
"DVD INIT".
If you change your mind at this point, select "DVD
— NO REQ." instead.
5
Press
.
The DVD player is reset to its factory defaults and
goes on standby. Press
player back on.
The TV Screen, HDMI Resolution, and other settings
will be set to their factory defaults. The HDMI Audio
setting will be set to off.
on the DVD player's
.
repeatedly to select
again to turn the DVD

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ns-bp300Dvd-840R-840

Inhaltsverzeichnis