Assembly; Scope Of Delivery; Transport - Optimum OPTIturn TU 2506 Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
3

Assembly

INFORMATION
The lathe is delivered pre-assembled.
3.1

Scope of delivery

When the lathe is delivered, please check immediately that it has not been damaged during
transport. Also check that no fastening screws have come loose.
Compare the scope of delivery with the attached packing list.
3.2

Transport


Centres of gravity

Load suspension points
(Marking of the positions for the
load suspension gear)

Prescribed transportation position
(Marking of the top surface)

Means of transport to be used

Weights
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport case.
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and that it is
in perfect condition. Observe the accident prevention regulations issued by your
Employers Liability Insurance Association or other competent supervisory authority,
responsible for your company.
Fasten the loads properly. Never walk under suspended loads!
GB TU2506 | TU2506V | TU2807 | TU2807V
Page 102 Original operating instructions
Assembly
Version 1.0.1 2014-05-16