Operation Via Keyboard; Menue Structure; Operation; (Only Possible With Interface-Operator And Digital Operator) - KEB COMBIVERT F4-F Lift Version 3.0 Kurzanleitung

3. Operation via
Keyboard

3.1 Menue Structure

3.2 Operation

Only possible with: - Interface-Operator (00.F4.010-1009) or
The inverter has parameters (set values and displayed values), which
are divided up into the following parameter groups.
LF-Parameter
Lift parameters
An-Parameter
Analog parameters
To change the parameter groups, the flashing dot must be behind the
letter. By pressing the „Enter"-key the flashing dot is shifted.
START
ENTER FUNC.
F/R SPEED
STOP
With the keys
STOP
START
select the

Parameter group

Select the parameter group with the „Start"-key (arrow upwards) or
„Stop"-key (arrow downwards). Press „Enter" key to change between
parameter group and parameter numbers.
The parameter numbers are selected with the arrow keys.
Operation
- Digital-Operator
dr-Parameter
„drive" = Motor
data
In-Parameter
Information
parameters
Change between
parameter group and
parameter number
ENTER
F/R
(00.F4.010-2009)
EC-Parameter
„Encoder" =
encoder
adjustments
ru-Parameter
„run" = indicated
values
START
ENTER FUNC.
F/R SPEED
STOP
With the keys
STOP
START
select the respective
Parameter number
GB-11