64
KEMPER PROFILER
Making connections
Connections for profiling a hardware guitar amp
Here are a few typical scenarios for the most common profiling setups:
•
Connect your guitar to the INPUT jack of the KemperPROFILER.
•
Connect the DIRECT OUTPUT/SEND of the PROFILER to the guitar input of your hardware amplifier.
•
Connect your microphone or microphone preamp to the RETURN INPUT jack of the PROFILER (use either
the XLR or quarter-inch input depending on your microphone or microphone preamp).
Guitar Input
Return
Direct Out/
Send
Input
Main Outs