Output/Master Button; Master Volume Knob; Volume Knob - Kemper PROFILER Bedienungsanleitung

24 KEMPER PROFILER

Output/Master button

This button brings the Output settings into focus. These are:
• Volume settings for different outputs
• Volume Link buttons to link and unlink the individual volumes to the master volume knob
• Output Sources to feed the outputs with different signals
• Separate Main Equalizer and Monitor Equalizer
• "MonitorCabOff", a global switch to bypass the virtual speaker cabinet individually for the Monitor Output
By engaging "MonitorCabOff" you can run the PROFILER directly to a power amp driving a guitar cabinet
on stage, while the Main Outputs still carry the full signal, including the virtual speaker, to be connected to
the front mixing desk.
All the Output settings are global (or "locked") and are therefore not saved with the rig, but like all other
modules, you can save local presets for the Output settings. Store and use individual local presets for spe-
cific adjustments to suit different venues, studios or rehearsal rooms.
✔ ✔
Note: Read more about the Output settings and special applications in the "Reference Manual"

Master volume knob

"Master Volume" is always global, and therefore not stored with a rig. To control headphone volume, please
use the dedicated soft control in the output section, which can be accessed by pushing the OUTPUT but-
ton. Changing the volume doesn't affect the color of sound.

Volume knob

VOLUME controls the relative volume of a rig, and is stored as a part of it. Use this control to level out vol-
ume differences between rigs. Again, changing the volume doesn't affect the color of sound.
(14)
(15)
(16)