Amplifier Module - Kemper PROFILER Bedienungsanleitung

through your local presets like in any other section. Specifically, whilst in the Stack Section you can choose
'From Rigs' to browse Stacks included in other rigs according to your selected view and sorting. Selective
Browse is available for Stack, Amp, and Cabinet.

Amplifier module

Hold the AMPLIFIER button to display the amplifier settings.
Definition
♦
This parameter determines the way the preamp distorts when overdriven. Every guitar amp produces a dif-
ferent kind of distortion. The "Definition" parameter controls the characteristic fingerprint of the preamp.
The profiling process automatically sets "Definition" to the position that best represents the reference
amp.
Settings on the left of the parameter range
Settings in the middle
right
Settings at the
As you can see, by tweaking "Definition", you can change the preamp distortion characteristic completely.
So you could, for example, use this control to modernize the profile of a vintage amp without having to
use additional stomps. Alternatively, start with a profile of a modern tube amp and use "Definition" to give
it a more vintage sound, when driven.
You can also use "Definition" to align the sound of your guitar to the sound of your amp, if required. Don"t
be afraid to experiment until you get the balance that sounds best to you.
of the parameter range
of the parameter range
Woody, muted, bluesy, or earthy textures with a
limited dynamic range.
Fat and creamy textures with a greater dynamic
range.
Sparkling, brilliant, interactive and boutique.
BUILDING A RIG 43