Main Output Section - Kemper PROFILER Bedienungsanleitung

BACK PANEL OVERVIEW 27

Main Output section

(1)
This is your MAIN STEREO out. Use these outputs to connect to a mixing desk in a recording studio, or
to the front of house mixer in a live situation. These outputs deliver the entire rig: amp, cabinet and all ef-
fects. You have a choice of XLR (symmetrical) or quarter-inch jack (not symmetrical). The XLR outputs are
protected against 48 V phantom power fed by a mixing desk. However you should avoid to feed phantom
power into the PROFILER to get the best audio quality. Like all inputs and outputs it offers a GROUND
LIFT to prevent a hum loop.
A typical home studio setup:
Return and Alternative In
as Stereo Aux In *
Input
Headphone
Main Outs
* special cable required (mini stereo jack – 2x TS