Beat Scanner - Kemper PROFILER Bedienungsanleitung

highlighted, the present tempo is applied to each of the five slots, to ensure an equal tempo for the setup
of a song. The tempo settings of the individual rigs are ignored. Performance Tempo is stored with the
Performance.
✔ ✔
Take care to enable the Tempo for all slots in the Performance to which the tempo is relevant - e.g. for a
delay - by pressing the TAP button once when the respective slot is in the focus. Activating "Performance
Tempo" will overrule the rig tempo settings, but not the "Tempo Enable" state, for good reasons.
The soft button "Lock Tempo" will prevent Rig changes or Performance changes affecting the current tem-
po. This setting will now stay forever, until you change it by tapping a new tempo or using one of the other
tempo change methods described above.
TAP Tempo Button
Tap the TAP button rhythmically in quarter notes (crotchets) to create the desired tempo. A tempo is
taken with the second tap, but the more you tap, the more accurate the tempo will be. To really get the
most out of TAP tempo, you can assign a foot switch to this parameter, and simply tap the beat with your
foot while you play. You can also assign a button of a MIDI remote switch to the TAP function. Learn more
about this in the Reference Manual chapter "MIDI and Remote Controller"
✔ ✔
TAP Tempo does not only influence the time value of the delay, but also any other tempo-related effects
in the present rig as well. To achieve the desired beats per minute (BPM), it is essential that you only tap in
quarter notes (crotchets). Delay type must be set to Tap Delay to sync to tempo. The rhythmic pattern of
the delay is determined by the respective musical values for each delay channel.

Beat Scanner

The Beat Scanner is a nice alternative to the TAP Tempo; instead of tapping, just keep the TAP button, or
foot switch pressed to activate it. Now, continue playing guitar. The Beat Scanner algorithm listens to the
rhythm of your playing and will detect the BPM in a few seconds. You don"t need to play a special beat -
any riff should suffice, as long as it is played with a certain accuracy. Avoid playing prominent triplets or
dotted notes, as this might trick the Beat Scanner towards a wrong tempo. When the tempo is set to your
TEMPO 49