Kemper PROFILER Bedienungsanleitung Seite 46

46 KEMPER PROFILER
wards the left most position, the sound will resemble that of analog cabinet simulations (which often have
a very limited frequency response and little character).
Effects section
The Effects section is where you can add stereo effects after (post-) the mono stomps section and the
amp stack. It consists of the following modules:
X
♦
The X stomp can use the same effects as the stomp boxes, but in stereo, which is especially useful with ef-
fects like chorus that spread the sound over the stereo image.
Mod
♦
MOD can also use the same effects as the stomp boxes. However, this module is equipped with hardware
controls which are designed to work specifically with modulation effects such as Chorus, Flanger, Phaser
or Rotary. For this reason we recommend saving this slot for these types of effects. Modulation rate and
intensity can be controlled using the dedicated RATE and INTENSITY knobs.
Delay
♦
These are the built-in delay effects. You can determine the stereo placement of the delay signals, the
rhythmic values of the repeats, and also the character of their sound. Delay feedback and mix can be con-
trolled conveniently using the dedicated hardware controls.