Gain Knob; Input Button - Kemper PROFILER Bedienungsanleitung

20 KEMPER PROFILER
Your local preset can be found and reloaded later by turning BROWSE, when you have a similar effect in
focus. In the next step you are able to edit the name of the rig.
Soft Button #1
Soft Button #2
Soft Knob #1
Soft Knob #4
Press STORE again to complete the procedure.

Gain knob

(10)
The GAIN knob controls the amount of distortion and covers an extremely wide range from ultra-clean to
totally distorted. The GAIN control allows for the same large range on all profiles, even if the original amp
has a more limited gain range.
The gain parameter compensates for the loss in level with any amount of gain reduction. You can turn
the gain value to zero for every amp profile and the result will be a totally undistorted and uncompressed
sound that has the same perceived loudness as the fully distorted version.

Input button

Press this button to enter the input section where you set the input sensitivity for your guitar. There are
two parameters in this section: "Clean Sens" and "Distorted Sens". Each one can be modified using a dedi-
cated soft knob. The NOISE GATE, with its dedicated knob, also belongs to the input section.
Insert a space to the left of the selected character.
Clear the selected space or character.
Toggle between upper case and lower case letters.
Scroll through the available characters.
(11)