Getting Started - Kemper PROFILER Bedienungsanleitung

Getting started

Okay, enough talk — let"s plug in and get playing!
1. Connect your guitar to the INPUT on the right side of the front panel.
2. Connect the MAIN OUTS on the rear side to the inputs of your mixer.
3. Power the unit on by bringing the chicken head switch to the BROWSE position.
Immediately after the startup screen you will be prompted to set the time and date and enter your name.
Do not skip this procedure, because any new sound that you store in the device memory will be tagged
with both your name as the rig author and the correct date; this will help it to be found easily later and to
be listed in an appropriate order. That's it! It"s time to start browsing rigs and playing some guitar.
More on connecting your gear
The PROFILER is equipped with a studio-grade analog input section followed by a state-of-the-art A/D
stage to get the best possible sound. Once your guitar signal has been processed, the high-quality D/A
stage ensures that you'll get the best sound quality into your speaker rig. You'll notice that the Kemper
PROFILER offers multiple inputs and outputs in both analog and digital formats, which we'll describe in
more detail down below. We included all this connectivity so you can use the PROFILER as a central hub in
your studio to connect your guitar to a variety of other amps, effects and recording gear and use the PRO-
FILER to switch among them.
In case you have any hum-related issues in your studio or stage, we provide ground lift switches for the
analog outputs.
If you want to use the PROFILER on stage you can connect a power amp to the MONITOR OUTPUTs.
If you want to make your own profiles you will need to connect your reference amplifier using the DIRECT
OUT and the LOOP RETURN inputs. More details on profiling are provided both later in this manual, and in
more detail in the Profiling Guide. In addition, the DIRECT OUTs can be used in conjunction with the LOOP
RETURNs to connect to the effects loop of an external amp, or to connect any external effect unit, such as
your favorite stomp box.
GETTING STARTED 11