Monitor Out Section; Return And Alternative Input - Kemper PROFILER Bedienungsanleitung

28 KEMPER PROFILER

Monitor Out section

(2)
Use this mono output to connect the PROFILER to a stage monitor with its own level controls. This output
also has its own GROUND LIFT.
You can also connect this output to a power amp and a regular guitar cabinet. In this case, you need to
switch the cabinet simulation off, using the soft button "Monitor Cab Off" in the output page, to prevent
unwanted coloration created by running a speaker-emulated signal through a guitar cabinet.

Return and Alternative Input

(4)
The ALTERNATIVE INPUT can be used as a rear side guitar input, which is convenient for Rack and Power-
Rack in particular. The RETURN input is available as TRS or XLR input. The RETURN input can be used as a
loop return in external hardware equipment. Select "Loop Mono" or "Loop Distortion" in one of the stomps
to include a hardware effect in your signal flow. When combined, the RETURN and ALTERNATIVE input
can be used as the stereo loop returns for external stereophonic equipment by selecting "Loop Stereo" in
the EFFECTS section (X or MOD). Both the RETURN and the ALTERNATIVE input can also be used as aux-
iliary inputs. You could, for instance, use this feature to mix in music from your Mp3 player to the sound of
the PROFILER to play along. You will find the corresponding mix controls in the Output Stage. Please note
that the PROFILER"s XLR input does not provide phantom power. More details about the usage of the RE-
TURN, in context of profiling, can be found in our Profiling Guide.