Input Led; Noise Gate Knob - Kemper PROFILER Bedienungsanleitung

✔ ✔
Both the Return Input and S/PDIF Input do not respond to the settings of Clean Sens and Distorted Sens.
They have their dedicated control Reamp Sens, as described in the Reamping chapter.
Reamp Sens
♦
Detailed description of reamping input levelling can be found in the Reference Manual.

Input LED

(12)
The LED reflects the level of the input signal. Green is OK, yellow is still OK, red is too high.

Noise gate knob

This knob controls the NOISE GATE, which eliminates the noise and hum of your guitar in a very smart
way. Turn the NOISE GATE knob to the right, until noise and hum have disappeared; do not turn it beyond
that point, as this might alter the sound of your guitar. When set to the appropriate position, you will no-
tice that the noise gate is capable of eliminating noise and hum, even when the strings still sound. There is
no need for an additional release control as in classic noise gates. The noise gate settings can be stored as
part of a rig.
Like Clean Sens, the NOISE GATE setting is part of the Input Stage, and is stored with the rig as well as
with an input preset. When the Input Stage is locked, the NOISE GATE is locked as well.
With the chicken-head set to PROFILER mode, the noise gate will also work with the connected amplifier,
but without interfering with the result.
(13)
FRONT PANEL CONTROLS 23