Kemper PROFILER Bedienungsanleitung Seite 42

42 KEMPER PROFILER
Building a rig
If you have ever used a digital guitar processor before, you will know that building your own rigs is part of
the fun! In the Kemper PROFILER you will find it surprisingly easy, as well. Simply bring any module or sec-
tion into focus, activate it, and select from a range of local presets using the BROWSE knob. Tweak to your
liking, add spices if necessary. To help get you started, here is a brief overview of the available modules:
Stomp section
This is a mono section. It includes all the built-in stomp box simulations that you can place before (pre-)
your virtual amplifier stack. An idle stomp slot can be activated by pressing and holding the corresponding
Stomp A/B/C/D button. Use the Type knob to browse through all available stomp algorithms. Selecting an
option will load the stomp and close the list browser.
Stomp Types
♦
There are several types of stomp boxes available in the stomp section, such as various Wah effects rang-
ing from bandpass to comb filters. There are also several distortion stomps available, which were modeled
after famous vintage pedals. On top of all this, modulation stomps such as Vintage Chorus, Hyper Chorus,
Vibrato, Air Chorus, Flanger, Phaser, Tremolo and Rotary Speaker are included.
Most stomp parameters are self-explanatory, and a detailed overview of all available stomp parameters can
be found in the Reference Manual.
Stack section
This is your "amplifier stack", consisting of your amplifier profile, speaker cabinet profile, and EQ. Pressing
the STACK button and holding it for a moment enter edit mode of the STACK section. You can rename the
Stack using the 'Rename' soft button. When you turn the BROWSE knob, you have the choice to browse