Kemper PROFILER Bedienungsanleitung Seite 52

52 KEMPER PROFILER
Using a MIDI pedal to switch rigs
You can assign a unique MIDI program change number to each rig, up to a maximum 128 rigs:
• Select a rig in Browse mode
• Press the SYSTEM button
• Navigate to the "Browse Mode PrgChg" page
• Use the soft knob to select a Program Change Number
• Press "Assign" to assign this number to the actual rig
Now here"s a deeper explanation of how the assignment works on this page: You can see two lines of text
on the display: the upper saying "Current Rig", the lower "PrgChg #". You can change the rig by using the
RIG navigation keys, just as you would in Browse mode, but you don"t have to leave this page to do so.
The lower line shows the actual Program Change Number followed either by the name of the rig assigned
to it, or by "unassigned". You can select a new number with the soft knob. Press "Assign" to link the actual
rig to the actual number. Any existing assignment to another rig will be lost. If you want to unassign an ex-
isting link, choose the respective rig and press "Unassign".
Rig button
This button is used to access rig-related parameters that are not covered elsewhere on the front panel. You
will find settings for the tempo and the volume pedal, as well as other features that are further described
in the Reference Manual.
Quick button
The QUICK button calls up a user-selectable page in an instant.