Software Update - Sl Analytics UviLine Sl 5000 Gebrauchsanleitung

13.8 Software update

The software and method update is used to continuously update the spectrophotometer.
Remark:
Only users of the user group, Administrator are allowed to carry out a software and method update.
The update comprises
 The newest firmware (meter software)
 New or changed method data
Data transfer to the spectrophotometer can be made with USB medium as a temporary storage.
To realize the update, the new software version or new methods have to be recording on USB medium.
This one has to be connected to the spectrophotometer.
Execution
1 Connect the USB medium to the PC.
2 Unpack the contents and complete folder structure of the downloaded exe or zip file in the main directory
(top level) of the USB medium.
Remark: If an unpacking program such as WinZip is used, the option "Use Folder Names" must be set.
3 Connect the USB medium to the spectrophotometer.
4 Switch on the spectrophotometer if necessary.
<HOME>
– [General setup]
- Software update
5 Press « ▲ » and « ▼ » keys to select « USB memory » as a source and press <START·ENTER> key.
The update process takes approx. three minutes.
The spectrophotometer switches itself off and then on again.
Note
If the photometer does not correctly start after a software update (e.g. no self test due to a power failure during
the software update): Press the <F3> key and continue the software update.
Various adjustments 227