Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 213

- Select « OK » or « Cancel »
11.3.6 Copying a result file
To backup files with measurement data outside the spectrophotometer, it is possible to copy them to external
media in different ways.
-
Copying individual files on a USB memory.
-
Copying of all files on a USB memory.
11.3.6.1 Copying single files onto a flash drive
11.3.6.1.1 Spectrum and kinetic curve after measurement
<HOME>
Spectrum,
Kinetics
– Kinetic or spectrum acquisition
– [Open
– Saving or not of spectrum or kinetics
- [Location]
- Select « USB memory »
After measurements of spectrum or kinetics, the user can save his curve spectral or kinetic in a "*.csv" file:
- Press F4 key [Open] to enter in the safeguard sub-menu.
- Press F1 key [Location].
- Select « USB memory ».
- Give a name.
- Confirm with <START/E NTER> key.
If the safeguard, in "*.csv" format were not carried out, the measurement data are lost when the user
leaves the measurement mode.
Remark
With kinetic recordings, the current measurement is always saved in the "KineticsBackup.csv"
file for safety reasons.
11.3.6.1.2 Spectrum and kinetic curve are memorized inside the « Internal file DataB » already
<HOME>
Spectre,
Cinétique
– [Open]
– Downloading of spectrum or kinetics curve
- <STORE>
- Press F4 key [Open].
- [Location]
- Select a spectrum or kinetics curve.
- Select «USB memory»
- Confirm with <START/E NTER> key.
- Press <STORE> key to open save dialog box.
- Press F1 key [Location].
- Select « USB memory ».
Memory 215