Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 200

202
10.8.5 « Edit » Menu
10.8.5.1 Slope
<HOME>
Kinetics
– [Open]
- [Edit]
- Slope
Calculation of raw slope (without factor)
* Katalytic activity = NO
- Press F3 key [Edit].
- Select « Slope ». It displays:
* « Interval » column
It is the number of measurement interval.
* « Slope [Δ/min] » column
It is the slope report to the minute per interval.
* « Time [s] » column
It is the time at the end of each interval.
* Total slope
It is the slope, report to the minute, of the straight regression line passing through various points of
measurement.
Calculation of the activity
* Katalytic activity = YES
- Press on F3 key [Edit].
- Select « Slope ». It displays:
Kinetics mode