Measurement - Sl Analytics UviLine Sl 5000 Gebrauchsanleitung

162 Absorption / Transmission mode

7.2 Measurement

- Press F2 key [Wavelength] to enter a new wavelength.
- Press <ZERO BLANK> key to start the zero measurement.
- Press <START ENTER> key to start the sample measurement
It displays:
Absorbance and transmittance are displayed.
- Press <START ENTER> key to start a new measurement.
If there are several measurements, the last four are displayed at the same time
as the measurement in progress.
- Press F4 key [Continuous] to measure the same sample several time again.
The measurement is about every 2 seconds.
- Press F4 key [Stop] to stop the continuous measurement.