Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 154

156 Concentration mode
...............
When the dilution factor is entered, confirm with <START ENTER> key. It displays:
The dilution factor (i.e.: [1 + 1]) is displayed on the top left part of the screen.
NOTE:
This dilution factor will be maintained with the value entered by the operator for all measurements to
come. At the time of the exit of the mode of analysis or analysis in progress it will be given to 0 (no
dilution).
6.4.1.9 Sample blank value
It is possible to subtract a sample blank for each measured sample.
- Press F1 key [Setup] after zero measurement. It displays:
Remark: The symbol at the end of « Sample blank value » means that the option is selected.
- Select « Sample blank value » with « ▲ » and « ▼ » keys and confirm with <START ENTER> key.