Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 202

204
To come back to a normal screen (first selected kinetics curve):
- Press on F1 key [Back].
10.8.5.4 Subtraction of a kinetic curve from one another
<HOME>
Kinetics
- Select method
– [Open]
- [Edit]
- Subtract kinetics
Subtract a stored kinetics curve from the current kinetics curve.
- Press on F3 key [Edit]
- Select « Subtract kinetics ».
- Select a kinetics curve. Confirm with <START ENTER> key.
The curve resulting of this operation can't be saved in memory.
To come back to a normal screen (first selected kinetics curve):
- Press on F1 key [Back].
WARNING: To subtract one kinetics curve from another one, the intervals have to be identical.
10.8.6 Manual change of absorbance scale
<HOME>
Kinetics
- Select method
– [Open]
- Select a kinetics curve
- [Setup]
- Scaling
- Manual
- Press on F1 key [Setup], select « Scaling » and then « Manual » to determine manually the absorbances
scales (Y axis).
- Enter the absorbance minimum and maximum.
Kinetics mode