Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 201

* « Interval » column
It is the number of measurement interval.
* « Slope [Δ/min] » column
It is the slope report to the minute per interval.
* « Time [s] » column
It is the time at the end of each interval.
* Total slope
It is the slope, report to the minute, of the straight regression line passing through various points
of measurement.
* RESULT
It is the slope, report to the minute, of the straight regression line passing through various points
of measurement, multiplied by the factor and expressed with the resolution and unit selected by the operator.
10.8.5.2 Printing activity
- Press on <PRINT> key.
SI
UviLine xxxx 7449001 1.18
Willy
04/10/2008 14:05:46
4001: TEST01
Katalytic activity:
Interval
1
2
3
4
Total slope/mn
10.8.5.3 Kinetics comparison
Load a second kinetics curve into the same diagram for direct comparison.
- Press on F3 key [Edit].
- Select « Compare kinetics ».
- Select another kinetics curve. Confirm with <START ENTER> key. It displays:
8.754 µkat
Slope [Δ/min]
-0,294
-0,942
-0,882
-0,588
-1,353
Kinetics mode
Time [s]
30 s
60 s
90 s
120 s
120 s
203