Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 125

Function keys F1 to F4
The function keys F1 to F4 have different functions depending on the operating situation.
The current functions are displayed in the function key menu at the bottom edge of the display.
4.2.3 Use of alphanumeric keyboard
Numerals, letters, punctuation marks and special characters are entered with the alphanumeric keypad of
the meter or using an external keyboard.
4.2.3.1 Characters
The following characters are available:
 Numerals (0 ... 9)
 Letters (A ... Z) and (a ... z).
 Punctuation marks (. and -)
 Special characters ° / + Δ, Σ, µ, #, %, : et ()
4.2.3.2 Command principle
Entering characters is always possible if there is an input field on the display.
The numerals and characters (expect for the small letters) assigned to the keys of the alphanumeric
keypad are printed on the keys.
Example: With the <2/ABC> key you can enter the following characters: 2, A, B, C, a, b, c.
Select the required character by pressing the key several times (similar to a mobile phone).
When pressing a key that is assigned to several characters once, the respective numeral appears first.
To enter a numeral, one key pressing is always sufficient.
When pressing the key for the first time a line pops up that displays all characters possible with this key.
The currently selected character is highlighted.
A character is taken over in the input field if

the character is highlighted for more than one second,

the character is confirmed with <START·ENTER>,

another alphanumeric key is pressed.
Remark
During mere number entries (such as entering a wavelength), the keys of the alphanumeric keypad are
assigned to the respective numeral only.
Each pressing key directly enters the numeral (like a pocket calculator).
4.2.3.3 Special characters
To enter special characters, use <1/*> key.
4.2.3.4 Correction of bad character
Use <◄> key, to delete all characters until THE INCORRECT one and start the entries from there again.
Overview 127