Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Warning
The line voltage of the usage location must fulfill the specifications stated on the
power pack. Always use the supplied 12 V original power pack only.
3. Connect the miniplug of the power pack to the socket (1) of the spectrophotometer.
4. Connect the power pack to an easily accessible power socket.
The display illumination switches on and then off again.
5.2.3 First photometer activation
During the initial commissioning, the spectrophotometer automatically guides the user through the setting
of the meter language, date and time after switching on (see following sections).
1) Press the <ON/OFF> key. The spectrophotometer is switched on.
2) The language setting is displayed (see chapter 6.2.4)
Start up
Abb. 24 Connection of power supply
131
Werbung
Kapitel
Inhaltsverzeichnis
