Sl Analytics UviLine Sl 5000 Gebrauchsanleitung Seite 177

Spectrum mode 179
The spectrophotometer memorizes the baseline.
Wait until the end of measurement. It displays:
- Insert the sample inside the cuvette holder.
- Close the cover.
- Press <START ENTER> key to start the measurement.
When the spectrum is finished, it displays the following message:
- Press <START ENTER> key to confirm.
Information cursor
The cursor appears at the absolute maximum of the spectrum.
The operator has the following possibilities:
- Immediately realized some calculations on the spectrum (see paragraph 10.7).