224
13.3 Display settings
<HOME>
– [General setup]
- Display settings
Here, it is possible to adapt the brightness of the display.
1 Select and confirm « Display settings ».
An adjustment system using a cursor is displayed to adjust the screens brightness.
2 Adjust the screen contrast by pressing « ◄ » and « ►» keys and confirm with <START/ENTER> key.
3 Come back to the main menu with <ESC> key.
13.4 Reset
It is possible to reset (initialize) the measurement settings or all settings.
Remark
The reset function is only available for users belonging to the user group « Administrator ».
There are different possibilities to reset the instruments settings.
Parameters reset
Delivery conditions
Service lamp counter
<HOME>
– [General setup]
- Reset
The menu where to select the reset type (Delivery condition / Reset configuration) is displayed.
1 Select and confirm the reset type.
The reset is carried out.
Various adjustments
All settings are deleted except the memory
which contains measurements results, methods
defined by the user and the measured blank
values.
All settings (including measurement data
memory and user-defined methods) are deleted
and the spectrophotometer is reset to the
delivery condition.
Allow to reset to zero the service lamp counter
after the lamp changing