Cleaning The Accessories - Gastroback 42438 Design Tea & More Advanced Bedienungsanleitung

CLEANING THE POWER BASE AND KETTLE
1. Always remove the kettle from the power base, unplug, and leave the appliance
cool down to room temperature, before cleaning the appliance.
CAUTION:
Always keep the power socket in the middle of the power base and
the power connector in the bottom of the kettle completely dry. Avoid spilling or drip-
ping any liquid onto the base. Do not use any hard objects for cleaning the kettle to
avoid damage to the seals.
2. If required, clean the interior of the kettle using a soft nylon brush or soft sponge.
Then, rinse the interior of the kettle thoroughly with tap water. De-scale the kettle,
if stubborn residues of scale cover the heating plate (see: 'De-scaling the Kettle').
3. Wipe the exterior of the kettle, power base, and power cord with a slightly damp
cloth, removing any residues of splashes. Always ensure to keep the power
socket completely dry. Do not spill any liquids onto the operating elements.
4. Thoroughly wipe dry all parts. Thereafter, leave the parts of the appliance dry
naturally for approx. 30 minutes, where they are out of reach of young children.

CLEANING THE ACCESSORIES

WARNING:
may crack easily, when handled carelessly. Please, use special care, when handling
any of the glass parts to avoid damage and injuries caused by splinters and shards.
Do not expose the glass parts to extreme temperature variations to avoid cracking.
You may clean the lid sets, glass insert and glass lid, tea filter, and stainless steel
bowl in an automatic dishwasher.
CAUTION: For cleaning the glass parts in the automatic dishwasher, always
ensure that the glass parts will not touch any other dishes during operation of the
dishwasher. Otherwise the rim of the glass could get cracked or chipped. Do not use
the glass parts any more, if the glass is chipped, cracked or broken in any way, to
avoid injuries due to splinters and shards.
1. Clean the lid sets (lid ring and assigned lid), the glass parts (glass insert and glass
lid), tea filter, and stainless steel bowl in warm dishwater using a soft nylon brush
or a soft sponge. Do NOT use any abrasive cleaners, abrasive cleaning pads,
or hard or sharp-edged objects for cleaning to avoid damage to the surfaces.
2. Stubborn residues can be removed easily, after soaking the parts in warm dish-
water for approx. 10 minutes and, thereafter, brushing with a soft nylon brush.
3. After cleaning, dry all parts thoroughly and leave dry naturally for approx.
½ hour, where they are out of reach of young children.
76
Glass insert and glass lid are manufactured of thin-walled glass and