Gastroback 42438 Design Tea & More Advanced Bedienungsanleitung Seite 67

insert in the kettle and leave the appliance running the keep warm function until
your food is done. Alternatively, you may cancel the program by holding the
"Start/Stop" button pressed for 3 seconds and thereafter start the "Boil" program
again with the appropriate time setting.
12. After the keep warm time elapsed, the appliance will switch back to standby
mode automatically. 5 minutes later on, the appliance will shut off completely
and the display will get dark.
13. After usage, you should discard the water within the kettle to avoid excessive
build-up of scale on the heating plate. Unplug the appliance.
Creating Your Own Cooking Program
You can adapt the "Custom" program to your own requirements. Select a tempera-
ture in the range of 40°C to 100°C (boiling) and cooking time of 30 seconds to
12 hours, just according to your recipe. To avoid excessive loss of water within the
kettle during operation, the water temperature within the kettle is limited to 90-95°C
during the cooking time ("Steeping"). However, with a temperature setting of 100°C,
the kettle will bring the water to the boil first.
The values you had set when starting the "Custom" program will be kept in memory
even after switching off and unplugging the appliance.
Note:
After the set cooking time ("Steeping") elapsed, the appliance will switch to the
keep warm function ("Warm"), keeping your meal warm for additional 60 minutes.
However, the temperature for the keep warm function is limited to 80°C at the
maximum.
IMPORTANT: Please keep in mind, that the recent settings will be overwritten by
any new values you have set when starting the "Custom" program again.
1. Ensure that glass insert and glass lid are clean and undamaged. There may be
no cracks and chipped edges. If required, sterilize the glass parts via hot water
before filling in your food.
2. Fill 500 ml to 1100 ml of clear tap water into the kettle and place the kettle onto
the power base.
3. Fill the prepared food into the glass insert. However, do not fill in more than
480ml. Then close the glass insert via the glass lid.
4. Place the glass insert lid ring (large opening) onto the work space and place the
glass insert into the central opening of the lid ring.
5. Then lift the lid ring by both handles. With the glass insert hanging in the lid ring,
67