Operation - Gastroback 42438 Design Tea & More Advanced Bedienungsanleitung

OPERATION

WARNING:
Always ensure that the appliance and all its parts and accessories
are out of reach of young children. The glass parts (kettle, glass insert, glass lid)
could break or crack when handled carelessly. Even small splinters and shards could
cause severe injuries when getting into your food and beverages. Thus, always
handle the glass parts with special care to avoid injuries and damage. Do not use
any glass parts any longer when these parts are broken, cracked, or chipped in any
way.
Hot water and steam could case severe scalds. Always ensure not to spill hot water.
Always ensure that the kettle will not fall or fall over while containing hot water. Duri-
ng operation and some time thereafter, only touch the kettle and lid by the handles,
as the exterior of the kettle and the lid may be hot. Even with the lid closed, hot steam
could escape from under the lid. Do not hold any part of your body or any delicate
objects over or directly near the appliance while the appliance is hot. Beware of
hot steam and condensate, when removing the glass insert and/or pouring out the
water.
The kettle is heated via electrically powered heating elements. Do not attempt to
heat the kettle by any other source of heat. Directly within the kettle only clear drin-
king water and tea may be heated. Do not fill in any other beverages, food, or any
foreign liquids into the kettle. For heating food and beverages other than water or
tea, always use the glass insert.
Unplug the appliance and leave it cool down completely, before cleaning the appli-
ance, and when the appliance is not in use. Do not leave the base unattended
while connected to the power supply.
If water runs out during operation, immediately unplug the appliance (see: 'Solving
Problems').
Ensure to place the appliance on a level, flat, stable, and dry surface. Do not place
the appliance near the edge of the working space or on inclined surfaces. Do not
operate the appliance in a tray or tub or on a metal surface to avoid high risk of
electric shock, when overflow or splashing of hot water occurs. To avoid overheating,
before operation, always fill a sufficient amount of clear drinking water into the kettle
(at least 500ml/MIN). Do not operate the appliance with the kettle empty. Always
remove the kettle from the base and wait until the kettle cooled down, before fil-
ling the kettle anew. For adding water while a cooking program is running, always
pour the cold water into the middle of the kettle. For this, take out the glass insert first.
Do not leave cold water run down the side walls of the kettle, it the kettle is hot.
Do not fill in more than the maximum amount (see: 'Technical Specifications'). If the
kettle is overfilled, boiling water may splash out. For moving the kettle, always ensu-
re to hold the kettle level, when it is filled. Regularly de-scale the kettle (see: 'Care
and Cleaning').
59