Standby Mode; Moving The Tea Basket When Not In The Brewing Cycle; Temperature Conversion (°C To °F) - Gastroback 42439 Bedienungsanleitung

Re-selecting the ›Auto Start‹ Feature Using Previous START TIME
1. Press the AUTO START button once. The HOT WATER/Cancel and TEA/Cancel
buttons will flash.
2. Press either the HOT WATER/Cancel or TEA/Cancel button to re-select the the
desired function. The ›Auto Start‹ feature has now been re-set.
Note:
The ›Auto Start‹ feature can be canceled anytime by pressing the AUTO START
button. The LCD screen will no longer display the
AUTO START button surround will cease to illuminate.

Standby Mode

When the appliance is plugged into a wall outlet, the LCD screen will illuminate for
3 minutes before entering standby mode. When in standby mode, the LCD screen
will cease to illuminate.
To re-activate the appliance out of standby mode, press any button, except the HOT
WATER/Cancel or TEA/Cancel button on the Power Base. The LCD screen will re-
illuminate. Pressing either the HOT WATER/Cancel or TEA/Cancel button will start
the respective operation immediately.

Moving the tea basket when not in the brewing cycle

After the brewing cycle is complete, you may wish to lower the tea basket again for
extra infusion to produce a stronger tasting tea. To do this, press and hold the BAS-
KET button for 2 seconds. The button surround will flash and the tea basket will auto-
matically lower to the bottom of the glass jug. Once the desired strength has been
reached, press and hold the BASKET button for 2 seconds. The button surround will
flash and the Tea Basket will automatically rise to the top of the glass jug.
Note:
If the glass jug is removed from the power base and the tea basket is in the
lowered position, it will automatically return to the top upon return of the glass jug
to the power base.
TEMPERATURE CONVERSION (°C TO °F)
The temperature reading on the appliance is preset to Celsius but can be converted
to Fahrenheit. Simultaneously press and hold the TEA TYPE and TEA STRENGTH
buttons for 2 seconds. The corresponding ‚°C' or ‚°F' symbol will be displayed on
the LCD screen.
AUTO START symbol and the
49