Care And Cleaning - Gastroback 42438 Design Tea & More Advanced Bedienungsanleitung

Problem
"E1" is displayed.
"E5" is displayed.

CARE AND CLEANING

WARNING:
young children. Always switch OFF (hold the "Start/Stop" button pressed until the
signal sounds), unplug, and leave the appliance cool down, before cleaning the
appliance.
Do not spill or pour any liquids on or in the power base or power cord. Do not
place or immerse the power base, kettle or power cord in any liquids to avoid
damage, risk of fire, and electric shock. Especially keep the power socket at the
power base and the power connector in the bottom of the kettle always completely
dry and clean. Do not attempt to clean the power socket or the power connector,
to avoid damage.
Glass can easily break or crack. Always use special care while handling the glass
parts (kettle, glass insert, and glass lid). Do not expose the glass parts to extreme
temperature variations.
Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving
agents) for cleaning the appliance or any part of it, to avoid damage to the surfaces
and seals. Do not use any hard or sharp-edged objects for cleaning (e.g. scoring
pads, knives, scrapers). Do not use violence.
DO NOT clean the kettle, power base, or power cord in an automatic dishwasher!
Depending on the water hardness and the usage, the interior of the kettle gets coated
with grey or sand-coloured scale or brown residues of tea. To keep the appliance
always ready for use, and to avoid damage to the heating elements, you should
remove these residues and de-scale the kettle in time (see: 'De-scaling the Kettle').
However, do not use any de-scaling solution not recommended in this booklet, to
avoid damage to the heating plate, temperature sensor, and seals of the kettle.
Depending on the usage, you should clean the appliance and accessories always
immediately after use, to avoid the build-up of stubborn residues.
Reason
Alarm on overheating.
Overheat alarm of the "Yogurt"
program.
Always ensure that all parts of the appliance are out of reach of
The Solution
Wait for the kettle to cool down for approx. 30
minutes. Then fill the kettle with at least 0.5 litres
of water. Please, always check the water level in
time.
Please ensure that the water temperature inside the
kettle is below 70°C. Leave the kettle cool down.
75