Bringing The Water To Boil; Heating The Water To The Desired Temperature; Using The Keep Warm Function - Gastroback ADVANCED THERMO Bedienungsanleitung

BRINGING THE WATER TO THE BOIL
Simply touch the ON/OFF button to start the heating process.
The kettle will start heating immediately. The display will show the current water tempera-
ture, and "HEAT" will appear on the display. As soon as the water reaches the boiling
temperature (100°C), a signal sounds and the heating plate is switched off automati-
cally.

HEATING THE WATER TO THE DESIRED TEMPERATURE

Touch the temperature selection buttons + and/or – to set the desired temperature. A
beep sounds with every entry. The selected temperature flashes 3 times on the display.
Thereafter, the appliance starts heating. The current water temperature and the indicator
"HEAT" are displayed.
You may change the set temperature any time. For this, simply touch the temperature
selection buttons + or – to set the new temperature.
As soon as the kettle reached the selected temperature, the heating plate is switched off
automatically. The display shows the actual temperature for approx. 30 seconds. Then
the display gets dark to save energy. If you wish to check the current water temperature
after the display has been switched OFF, shortly touch any button to reactivate the dis-
play.

USING THE KEEP WARM FUNCTION

Touch the Keep Warm button. The display shows "WARM". Use the temperature selec-
tion buttons + and/or – to set the desired temperature. The set temperature will flash 3
times. Then the kettle will start heating and "HEAT" is shown on the display.
As soon as the selected temperature is reached, the "HEAT" indicator disappears from
the display and the heating plate is switched OFF automatically. The appliance monitors
the water temperature and, if necessary, switches the heating plate on and off automa-
tically, to maintain the set temperature.
Note:
You should not activate the Keep Warm Function thoughtlessly. The kettle is designed
according to a vacuum flask. Depending on the amount of water and selected tem-
perature, without any additional heating the kettle will keep the water warm for up to
1 hour. The maximum time limit of the Keep Warm Function is set to 4 hours to avoid
useless energy consumption.
34