Manual Operation; Keep Warm Function; Automatic Shut-Off - Gastroback Design Tee Automat Advanced Plus Bedienungsanleitung

MANUAL OPERATION

NOTE
For manual operation you should activate the keep warm function within the set-
tings menu (see: 'Preferences'). You can perform an extraction manually by using
the WATER function (see: 'Operation / Heating Clear Water'). Immerse the tea
infuser of the filter system via the pusher, as soon as the water reaches the set tem-
perature, indicated by the acoustic signal. Wait until the steeping process is com-
plete, then pull the pusher upwards, until the infuser cover touches the magnet hol-
der. With the keep warm function activated, the water is kept at a temperature of
approx. 5-10°C (9-18°F) below the set temperature (see: 'Keep Warm Function').
The displayed time can be used for keeping the desired steeping time.
NOTE
Even manual operation is quite easy, when using the provided filter system of
the appliance and the hot water function (see: 'Recommended Usage of the Pro-
grams'). Via the pusher, you can move the tea infuser down and up manually wit-
hout effort. By simply pulling the tea infuser up until it touches the magnet holder,
the tea infuser is kept above the water level.

KEEP WARM FUNCTION

After steeping (TEA button is illuminated) or heating water (WATER button is illuminated),
the appliance switches to the keep warm function automatically. The keep warm indica-
tor ("KEEP WARM") stays illuminated during the keep warm time. While the keep warm
function is running, the water is kept at the appropriate keep warm temperature.
NOTE
The keep warm temperature is set to 5-10°C (9-18°F) below the selected tempe-
rature ("BREW TEMP") and limited generally to 90°C.
IMPORTANT - You can deactivate the keep warm function. In this case, the appli-
ance switches off after steeping or simply heating water. Additionally, you can
pre-select the maximum keep warm time from 15 minutes to 60 minutes (see: 'Pre-
ferences'). However, after starting a tea program or user-defined program via the
TEA button, the appliance always enters a keep warm cycle of 5 minutes, showing
"BASKET" on the display. With a maximum keep warm time selected, the keep
warm function keeps running up.
After the keep warm function is cancelled (manually or automatically), the appliance
switches off completely. The operating elements and keep warm indicator ("KEEP
EN
82
WARM") get dark (see: 'Automatic Shut-Off').
NOTE
When removing the kettle from the power base, before reaching the set tempe-
rature, the appliance cancels the running program at once and returns to standby
mode. However, the keep warm function can be cancelled prematurely only by
pressing the start/stop button, you used for starting the program (TEA or WATER).
Otherwise, the keep warm function keeps running until the maximum keep warm
time is reached.
While the keep warm function is running, removing the kettle from the power base
does not terminate this function and the keep warm time keeps running as usual.
When placing the kettle back onto the power base, the water is heated to the keep
warm temperature.
If you do not wish to keep the tea/water warm any longer or the filling level drop-
ped below the minimum filling level after pouring (approx. 250ml; 1cm or half an
inch above the tip of the temperature probe), press the illuminated start/stop button
(TEA or WATER). The appliance returns to standby mode at once.
IMPORTANT - For saving energy, do not leave the keep warm function running
uselessly. Cancel the running program (press the illuminated start/stop button TEA
or WATER), if you do not need this function any longer. Additionally, you should
not leave the appliance connected to the power supply, uselessly. Unplug the
appliance, when it is not in use.

AUTOMATIC SHUT-OFF

When in standby mode (display is illuminated, no program is running) and without
any entries for more than 5 minutes, or after the maximum keep warm time is rea-
ched, the appliance switches automatically to energy saving mode (all buttons and
the display get dark). However, you should not leave the appliance operate or even
being connected to the power supply uselessly. To avoid excessive energy loss, if
the appliance is not in use, please cancel any operating cycle by pressing the illu-
minated start/stop button (TEA or WATER). Then unplug the appliance.
IMPORTANT - There is no reason for leaving the appliance connected to the
power supply, when it is not in use. Your individual settings and user-defined pro-
grams are kept in memory even after disconnecting the appliance from the power
supply.
For returning to standby mode after the automatic shut-off has been triggered, simply
press a button.
EN
83