Before First Use; Operation - Gastroback 42436 Bedienungsanleitung

BEFORE FIRST USE

WARNING: DO NOT let young children play with the appliance, or any part
of it, or the packaging!
it is not in use. Do not place or immerse the appliance (base and kettle) or power
cord in water or other liquids or spill any liquids on the base, power cord, or the
exterior of the kettle. For operation, always unwind the power cord completely to
avoid hazard due to overheating, fire, and electric shock. Do not use any abrasive
or corrosive cleaners for cleaning to avoid damage to the surfaces.
appliance or any part of it in an automatic dishwasher.
1. Unpack the appliance and all parts and accessories carefully. Check that no
parts are damaged or missing (see: 'Knowing Your New Water Kettle'). Careful-
ly remove all packaging, shipping materials, stickers, and promotional materials.
However, DO NOT remove the model label.
2. Before first use and after a longer period of storage, clean all parts of the appli-
ance (see: 'Care and Cleaning'). Press the opening button to open the lid. The-
reafter rinse the interior of the kettle thoroughly with clear tap water.
3. Select a suitable place for operating the appliance near a sufficient wall power
outlet, leaving a distance of at least 20 cm to the edge of the table or counter
and to any other object (see: 'General Safety Instructions').
4. Fill the kettle with 1.5 litres of clear drinking water and bring the water to the boil
by pressing the ON/OFF button (see: 'Operation'). Thereafter discard the water.
5. Repeat the recent step.
6. Then rinse the kettle with clear tap water. The appliance is now ready for use.

OPERATION

WARNING:
are out of reach of young children.
king water via electrically powered heating elements. Do not attempt to heat the kettle
by any other source of heat. Do not fill in any other beverages, food, or any foreign
liquids for operation to avoid injuries and damage due to overheating, fire, electric
shock, and high temperatures. Improper use or misuse may cause severe injuries and
damage. Unplug the appliance and leave it cool down completely, before cleaning
the appliance, and when the appliance is not in use.
ded while connected to the power supply. Always unplug the base when the appli-
ance is not in use.
Before operation, ensure that there are no leaks in the kettle. If water runs out during
operation, immediately unplug the appliance (see: ‚Solving Problems'). Regularly de-
scale the kettle (see: 'Care and Cleaning'). Do not use violence.
36
Always unplug the appliance before cleaning it, and when
Always ensure that the appliance and all its parts and accessories
The appliance is intended for heating clear drin-
Do not place the
Do not leave the base unatten-